CAD (0)
  • Cart is empty
Aldes’ Light Commercial indoor HRVs and ERVs are economical and versatile. Our wide range of off the shelf models deliver from 500 up to 2000 cfm of fresh, filtered air. For even the most energy conscious building designs, Aldes offers EC motors and control via BacNet and 0-10V input signals for continuously variable ventilation: just the right amount of air, when it’s needed most.
Unit of Measure

Specifications

Type

N/A Energy Recovery Ventilator

Defrost Mode

N/A Exhaust / Fan

Airflow

N/A 575 cfm

Voltage

N/A 208 - 230 V

Number of Phases

N/A 1

Frequency

N/A 60 Hz

Plate Exchanger Material

N/A High Latent Transfer (HLT)

Casing Material

N/A Painted Galvanized Steel 22GA

Casing Insulation

N/A 1" (25 mm) Fiberglass with FSK

Drain Connection

N/A 1/2 in

Duct Connections

N/A 14 x 8 in

Mounting

N/A Supplied with base rails. Support rods not included.

Full Load Amps

N/A 2.8 A

Minimum Circuit Amps

N/A 3.2 A

Maximum Overcurrent Protection

N/A 15 A

Blowers

N/A Two backward-inclined motorized impeller, direct-drive, EC motors, variable speed, external rotor

Filter Type

N/A Aluminum (P/N 683901)

Warranty

N/A 2 Year - Other Parts 5 Year - Core

Weight

N/A 136 lb

Shipping Weight

N/A 189 lb

Dimensions

Width

N/A 36-1/4 in

Height

N/A 23-7/8 in

Depth

N/A 32 1/8 in

Features

N/A

  • Electronically and independently adjustable supply and exhaust blowers (FlexControl)
  • Painted, heavy-gauge galvanized steel cabinets are attractive, rustresistant and extremely durable.
  • Doors on both sides of the unit to allow easy access to filters, cores and motors, no matter the installation constraints.
  • Fan exhaust frost protection, or optional recirculation defrost kit (factory installed or upgraded in the field).
  • Two highly efficient and noise reducing RadiCal centrifugal fans with EC motors from EBM Papst.
  • Durable High Latent Transfer enthalpy core has exceptional moisture transfer for increased comfort.