CAD (0)
  • Cart is empty
Aldes’ Light Commercial indoor HRVs and ERVs are economical and versatile. Our wide range of off the shelf models deliver from 500 up to 2000 cfm of fresh, filtered air. For even the most energy conscious building designs, Aldes offers EC motors and control via BacNet and 0-10V input signals for continuously variable ventilation: just the right amount of air, when it’s needed most.
Unit of Measure

Specifications

Type

N/A Energy Recovery Ventilator

Defrost Mode

N/A Recirculation

Airflow

N/A 990 cfm

Voltage

N/A 208 - 230 V

Number of Phases

N/A 1

Frequency

N/A 60 Hz

Plate Exchanger Material

N/A High Latent Transfer (HLT)

Casing Material

N/A Painted Galvanized Steel 22GA

Casing Insulation

N/A 1" (25 mm) Fiberglass with FSK

Drain Connection

N/A 1/2 in

Duct Connections

N/A 20 x 8 in

Mounting

N/A Supplied with base rails. Support rods by others.

Full Load Amps

N/A 5.6 A

Minimum Circuit Amps

N/A 6.0 A

Maximum Overcurrent Protection

N/A 15 A

Blowers

N/A Four backward-inclined motorized impeller, direct drive EC motor, variable speed, external rotor.

Filter Type

N/A Aluminum (P/N 683951)

Warranty

N/A 2 Year - Other Parts 5 Year - Core

Weight

N/A 214 lb

Shipping Weight

N/A 271 lb

Dimensions

Width

N/A 36-1/4 in

Height

N/A 23-7/8 in

Depth

N/A 47-1/4 in

Features

N/A

  • Electronically and independently adjustable supply and exhaust blowers (FlexControl).
  • Painted, heavy-gauge galvanized steel cabinets are attractive, rustresistant and extremely durable.
  • Doors on both sides of the unit to allow easy access to filters, cores and motors, no matter the installation constraints.
  • Fan exhaust frost protection, or optional recirculation defrost kit (factory installed or upgraded in the field).
  • Four highly efficient and noise reducing RadiCal centrifugal fans with EC motors from EBM Papst.
  • Durable High Latent Transfer enthalpy core has exceptional moisture transfer for increased comfort.