CAD (0)
  • Cart is empty

The HK1100-Fi-EC-N heat recovery ventilator provides up to 1000 cubic feet per minute (472 L/s) of fresh outdoor air while exhausting an equivalent amount of stale indoor air, creating a well-balanced ventilation system. The highly efficient and quiet variable-speed EC motors use on average 80% less electricity of the H1100-Fi-N at low speed, significantly increasing return on investment.

These ventilators are recommended for midsized nonresidential spaces or dedicated zones within larger buildings such as classrooms, common areas of residential complexes and indoor parking garages.

Designed for versatile indoor installation, Aldes light commercial ventilators can fit almost anywhere and still provide easy access to the internal components for quick maintenance. The units also offer a choice of five continuous operation speeds and a demand-controlled high speed exchange mode.

Unit of Measure

Specifications

Type

N/A Heat Recovery Ventilator

Defrost Mode

N/A Exhaust / Fan

Airflow

N/A 1000 CFM

Voltage

N/A 208 - 230 V

Number of Phases

N/A 1

Frequency

N/A 60 Hz

Plate Exchanger Material

N/A High efficient HRV counter-flow core

Casing Material

N/A Painted Galvanized Steel 22GA

Casing Insulation

N/A 1" (25 mm) Fiberglass with FSK

Drain Connection

N/A 1/2 in

Duct Connections

N/A 20 x 8 in

Mounting

N/A Supplied with base rails. Support rods not included.

Full Load Amps

N/A 5.6 A

Minimum Circuit Amps

N/A 6.0 A

Maximum Overcurrent Protection

N/A 15 A

Power Rating

N/A 1353 W

Current

N/A 5.6 A

Blowers

N/A Four backward-inclined motorized impeller, direct drive EC motor, variable speed, external rotor.

Filter Type

N/A Aluminum

Warranty

N/A 2 Year - Other Parts 5 Year - Core

Weight

N/A 145 lb

Shipping Weight

N/A 199 lb

Dimensions

Width

N/A 36-1/4 in

Height

N/A 23-7/8 in

Depth

N/A 47-1/4 in

Features

N/A

  • Electronically and independently adjustable supply and exhaust blowers (FlexControl).
  • Painted, heavy-gauge galvanized steel cabinets are attractive, rustresistant and extremely durable.
  • Access doors on both sides of unit.
  • Doors on both sides of the unit to allow easy access to filters, cores and motors, no matter the installation constraints.
  • Fan exhaust frost protection, or optional recirculation defrost kit (factory installed or upgraded in the field).