CAD (0)
  • Cart is empty

The HK650-Fi-EC-N heat recovery ventilator provides up to 580 cubic feet per minute (274 L/s) of fresh outdoor air while exhausting an equivalent amount of stale indoor air, creating a well-balanced ventilation system. The highly efficient and quiet variable-speed EC motors use on average 80% less electricity of the H650-Fi-N at low speed, significantly increasing return on investment.

These ventilators are recommended for smaller nonresidential spaces or dedicated zones within larger buildings such as classrooms, common areas of residential complexes and indoor parking garages.

Designed for versatile indoor installation, Aldes light commercial ventilators can fit almost anywhere and still provide easy access to the internal components for quick maintenance. The units also offer a choice of five continuous operation speeds and a demand-controlled high speed exchange mode.

Unit of Measure

Specifications

Type

N/A Heat Recovery Ventilator

Defrost Mode

N/A Exhaust / Fan

Airflow

N/A 580 CFM

Voltage

N/A 208 - 230 V

Number of Phases

N/A 1

Frequency

N/A 60 Hz

Plate Exchanger Material

N/A High effecient HRV counter-flow core

Casing Material

N/A Painted Galvanized Steel 22GA

Casing Insulation

N/A 1" (25 mm) Fiberglass with FSK

Drain Connection

N/A 1/2 in

Duct Connections

N/A 20 x 8 in

Mounting

N/A Supplied with base rails. Support rods not included.

Full Load Amps

N/A 2.8 A

Minimum Circuit Amps

N/A 3.2 A

Maximum Overcurrent Protection

N/A 15 A

Power Rating

N/A 681 W

Current

N/A 2.8 A

Blowers

N/A Two backward-inclined motorized impeller, direct-drive, EC motors, variable speed, external rotor

Filter Type

N/A Aluminum

Warranty

N/A 2 Year - Other Parts 5 Year - Core

Weight

N/A 145 lb

Shipping Weight

N/A 199 lb

Dimensions

Width

N/A 36-1/4 in

Height

N/A 23-7/8 in

Depth

N/A 32-1/8 in

Features

N/A

  • Electronically and independently adjustable supply and exhaust blowers (FlexControl).
  • Painted, heavy-gauge galvanized steel cabinets are attractive, rust-resistant and extremely durable.
  • Doors on both sides of the unit to allow easy access to filters, cores and motors, no matter the installation constraints.
  • Fan exhaust frost protection, or optional recirculation defrost kit (factory installed or upgraded in the field).