The HK1100-Fi-EC-N heat recovery ventilator provides up to 1000 cubic feet per minute (472 L/s) of fresh outdoor air while exhausting an equivalent amount of stale indoor air, creating a well-balanced ventilation system. The highly efficient and quiet variable-speed EC motors use on average 80% less electricity of the H1100-Fi-N at low speed, significantly increasing return on investment.
These ventilators are recommended for midsized nonresidential spaces or dedicated zones within larger buildings such as classrooms, common areas of residential complexes and indoor parking garages.
Designed for versatile indoor installation, Aldes light commercial ventilators can fit almost anywhere and still provide easy access to the internal components for quick maintenance. The units also offer a choice of five continuous operation speeds and a demand-controlled high speed exchange mode.
Specifications
Type |
N/A Heat Recovery Ventilator |
Defrost Mode |
N/A Exhaust / Fan |
Airflow |
N/A 1000 CFM |
Voltage |
N/A 208 - 230 V |
Number of Phases |
N/A 1 |
Frequency |
N/A 60 Hz |
Plate Exchanger Material |
N/A High efficient HRV counter-flow core |
Casing Material |
N/A Painted Galvanized Steel 22GA |
Casing Insulation |
N/A 1" (25 mm) Fiberglass with FSK |
Drain Connection |
N/A 1/2 in |
Duct Connections |
N/A 20 x 8 in |
Mounting |
N/A Supplied with base rails. Support rods not included. |
Full Load Amps |
N/A 5.6 A |
Minimum Circuit Amps |
N/A 6.0 A |
Maximum Overcurrent Protection |
N/A 15 A |
Power Rating |
N/A 1353 W |
Current |
N/A 5.6 A |
Blowers |
N/A Four backward-inclined motorized impeller, direct drive EC motor, variable speed, external rotor. |
Filter Type |
N/A Aluminum |
Warranty |
N/A 2 Year - Other Parts 5 Year - Core |
Weight |
N/A 145 lb |
Shipping Weight |
N/A 199 lb |
Features
|
N/A
|